Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
Designed through collaboration with world class athletes, coaches, and health professionals.
- 13mm thickness and 10cm in width.
- Black oiled leather finish with a red suede interior.
- IPF approved.
- English hide prepared for over five months for strength and longevity.
- Manufactured in Great Britain.
| Collection: | Classic |
|---|---|
| Gender: | Unisex |
| Product Type: | Belts |
| Size | Range (cm) |
| XS | 57.5-70 |
| S | 65-80 |
| M | 72.5-90 |
| L | 80-100 |
| XL | 87.5-110 |
| 2XL | 95-120 |
| 3XL | 102.5-130 |
| 4XL | 110-140 |
| 5XL | 117.5-150 |
How to measure
If you already own a belt, we recommend measuring your current belt on the tightest setting you use to give you the circumference of the belt at the setting you usually use.
If you do not have a belt then please measure your waist where the belt will sit (which is normally just above the navel), with your abdominal muscles braced. Please do not use your trouser waist measurement as this will not be accurate for the belt measurement.
We typically recommend a belt where you fall in the middle of the sizing guide, as this will allow you to adjust the belt in either direction depending on your preference of fit, what exercise you are using the belt for, should your bodyweight change, or if you wear the belt over layers of clothes or a neoprene belt.
To ensure the outer face of the leather and the stitching retain their original appearance, we would recommend using a regular black shoe polish once every 1-3 months. Polish directly onto the leather and then buff to a shiny finish.
Avoid dropping or throwing the belt, as this can cause damage to the belt buckle.
Zubehör für dein Training
SBD 10mm Lever Belt
€259.99*
Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
The 10mm lever belt is constructed using two different cuts of hide to allow the belt to retain support while moulding to your waist. Featuring a low profile buckle - along with rounded edges and corners - to minimise any obstruction or discomfort from contact between the legs and the belt.
Designed through collaboration with world class athletes, coaches, and health professionals.10mm thickness and 10cm in width.Black oiled leather finish with a red suede interior.IPF approved.Made exclusively from British cowhide.Manufactured in Great Britain.
SBD 13 mm Lever Belt
€259.99*
Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
Designed through collaboration with world class athletes, coaches, and health professionals. 13mm thickness and 10cm in width. Black oiled leather finish with a red suede interior. IPF approved. English hide prepared for over five months for strength and longevity. Manufactured in Great Britain.
SBD 5mm Weightlifting Knee Sleeves
€84.99*
Manufactured with high grade 5mm neoprene, designed to provide compression and support through a greater range of motion, ideal for dynamic movements.
Relied on by strength athletes around the world, these 5mm knee sleeves are ideal for weightlifting and provide support for movements with a greater range of motion than a powerlifting squat.
Sold as a pair.IPF approved and IWF compliant.5mm high grade neoprene and four-way stretch fabric for a greater stretch.Reinforced seam construction to maximise longevity.Anti-microbial, anti-run inner lining.Abrasion resistant exterior lining.Patented design.Manufactured in Great Britain.
SBD 7mm Knee Sleeves
€84.99*
Manufactured with high grade 7mm neoprene and designed to aid performance, these knee sleeves are relied on by strength athletes around the world and are ideal for powerlifting and heavy training.
Sold as a pair.IPF approved and IWF compliant with the maximum allowable 30cm length.7mm high grade neoprene for maximal support.Reinforced seam construction to maximise longevity.Antimicrobial treatment minimises the build-up of bacteria and reduces odour.Patented design.Manufactured in Great Britain.
SBD 7mm Powerlifting Knee Sleeves
€119.99*
The SBD Powerlifting Knee Sleeves are designed for competitive powerlifters looking for the maximum support from their sleeves.
They allow for significantly greater compression throughout knee flexion to maximise support and confidence during maximal attempts, increasing top end performance.
Sold as a pair.IPF approved and USAPL and IWF compliant with the maximum allowable 30cm length.High grade, high density 7mm neoprene offers maximal compression and surface contact area throughout knee flexion.Enhanced four-way stretch allows the neoprene to stretch during fitting and maintain compression all around the knee joint throughout the lift with no gapping.Heavyweight linings, edging and seams designed to hold up to even the most aggressive fitting.Antimicrobial treatment minimizes the build up in bacteria and reduces odor.Patented design.Manufactured in Great Britain.
SBD Elbow Sleeves
€59.99*
These elbow sleeves provide maximal support and compression for the joint, while ensuring the elbow is free to move easily, preserving range of motion.
The sleeves combine the high grade neoprene used in our knee sleeves with a thinner interior panel, ideal for pulling and pressing motions.
Sold as a pair.Combines a 5mm interior panel for freedom of movement and a 7mm exterior panel for maximum joint support.Reinforced seam construction to maximize longevity.Manufactured in Great Britain.
SBD Figure 8 Lifting Straps
€37.49*
Designed to sit flat against the base of the hand and to tighten on the wrist as the weight loads on the straps, attaching you securely to the bar throughout the lift.
Featuring our patent-pending webbing construction, which weaves filament aramid fibre within spun fibres. The figure 8 lifting straps offer greater strength than a nylon wrap, whilst providing the comfort of a cotton wrap.
Designed through collaboration with world class athletes to eliminate grip as a limiting factor when lifting for maximal weight or extra repetitions.
Patent-pending Figure 8 design to lock onto the wrist
Patent-pending webbing construction
Manufactured in Great Britain
Materials: Kevlar® fiber, polyester
DuPont™ and Kevlar® are trademarks or registered trademarks of affiliates of DuPont de Nemours, Inc.
SBD Lifting Straps
€29.99*
Featuring our patent-pending webbing construction, which weaves filament aramid fibre within spun fibres. The lifting straps offer greater strength than a nylon wrap, whilst providing the comfort of a cotton wrap.
Designed through collaboration with world class athletes to eliminate grip as a limiting factor when lifting for maximal weight or extra repetitions.
Patent-pending webbing construction
Manufactured in Great Britain
Materials: Kevlar® fiber, polyester
DuPont™ and Kevlar® are trademarks or registered trademarks of affiliates of DuPont de Nemours, Inc.
SBD Wrist Wraps
€39.99*
Designed specifically for wrist support and pressing movements. Featuring a heavy duty thumb loop alongside industrial fastening to ensure longevity and security.
Sold as a pair.IPF approved with the maximum width (8cm) and available up to the maximum length (1m).Proprietary wide elastics developed and manufactured specifically for wrist support.Left and right designs for equal wrapping of each wrist.Manufactured in Great Britain.
Edition
SBD 13 mm Lever Belt
€259.99*
Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
Designed through collaboration with world class athletes, coaches, and health professionals. 13mm thickness and 10cm in width. Black oiled leather finish with a red suede interior. IPF approved. English hide prepared for over five months for strength and longevity. Manufactured in Great Britain.
SBD 13 mm Lever Belt Grey/Black (Forge Limited Edition)
€260.00*
Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
Designed through collaboration with world class athletes, coaches, and health professionals. 13mm thickness and 10cm in width. Black oiled leather finish with a red suede interior. IPF approved. English hide prepared for over five months for strength and longevity. Manufactured in Great Britain.
SBD 13 mm Lever Belt Grey/Orange (Forge Limited Edition)
€260.00*
Featuring a patented gliding lever, providing the adjustability of a prong belt with the ease and tightness of a lever belt. Ideal for sizing up or down whenever you need during training sessions and competitions.
Designed through collaboration with world class athletes, coaches, and health professionals. 13mm thickness and 10cm in width. Black oiled leather finish with a red suede interior. IPF approved. English hide prepared for over five months for strength and longevity. Manufactured in Great Britain.